 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SMT10E Series DC-DC CONVERTERS * * * * * * * E Class Non-isolated 12 Vin single output 1 NEW Product 10 A Current rating Input voltage range: 10 Vdc to 14 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 94% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 6,920,000 hours per Telcordia SR-332 * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * Available RoHS compliant The SMT10E series are non-isolated dc-dc converters packaged in a surface-mount footprint giving designers a cost effective solution for conversion from a 12 V source. The SMT10E has a wide input range (10 Vdc to 14 Vdc) and offers a wide 0.8 Vdc to 3.63 Vdc output voltage range with a 10 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SMT10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SMT10E offers compact size and efficiencies of up to 94%. All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot/undershoot Ripple and noise Temperature co-efficient Transient response 5 Hz to 20 MHz 0.8-3.63 Vdc 0.4% typ. 0.2% typ. 1.0%typ. 3.0% typ. 0A None 60 mV pk-pk 25 mV rms 0.01%/C 100 mV max. deviation 100 s recovery to within 1.0% 10% Vo compensation GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Approvals and standards Material flammability Dimensions Weight Coplanarity MTBF 10-14 Vdc No load (max.) 100 mA 3 A max. @ Io max. and Vout = 3.3 V 100 mA rms (See Note 1) 20 ms (LxWxH) Fixed EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity 2 YEAR WARRANTY SPECIFICATIONS EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 94% Non-isolated 200 kHz typ. EN60950 UL/cUL60950 UL94V-0 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches 6.3 g (0.22 oz) 100 m Telcordia SR-332 6,920,000 hours Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Start-up time International Safety Standard Approvals ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 2) Operating ambient, temperature Non-operating -40 C to +85 C -40 C to +125 C PROTECTION Short-circuit Thermal Continuous Automatic recovery UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 TUV Product Service (EN60950) Certificate No. B03 10 38572 037 CB Report and Certificate to IEC60950, Certificate No. DE3-51686M1 File Name: smt10e_12.pdf Rev (03): 16 Dec 2005 SMT10E Series DC-DC CONVERTERS E Class Non-isolated OUTPUT POWER (MAX.) 33 W INPUT VOLTAGE 10-14 Vdc OUTPUT VOLTAGE 0.8-3.63 Vdc OUTPUT CURRENT (MIN.) 0A 12 Vin single output 2 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MAX.) 10 A EFFICIENCY (TYP.) 94% REGULATION LINE 0.2% LOAD 1.0% MODEL NUMBER (3,4) SMT10E-12W3V3J Part Number System with Options SMT10E-12W3V3-TJ Packaging Options (3) No `-T' Suffix = Pb-free RoHS 6/6 compliant parts in trays e.g SMT10E-12W3V3J -TJ = Pb-free RoHS 6/6 compliant part in Tape and Reel e.g SMT10E-12W3V3-TJ Product Family SMT = Surface Mount Rated Output Current 10 = 10 Amps Performance E = Enhanced Performance Output Voltage 0.8 Vdc to 3.63 Vdc Type of Output W = Wide Input Voltage 12 = 10 Vdc to 14 Vdc Output Voltage Adjustment of the SMT10E-12W3V3J Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT10E-12W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SMT10E-12W3V3J converter leaves the factory the output has been adjusted to the default voltage of 0.8 V. Notes 1 The SMT10E features an `Positive Logic' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT10E: Configuration Remote pin open circuit Remote pin pulled low [Von/off < 0.8 V] Remote pin pulled high [Von/off >1.6 V] Converter Operation Unit is ON Unit is OFF Unit is ON 2 3 4 An `Negative Logic' Remote ON/OFF version is also possible with this converter. To order please place the suffix `-R' at the end of the model number, e.g. SMT10E-12W3V3-RJ. Full derating curves available in both the Longform Datasheet and Application Note. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. File Name: smt10e_12.pdf Rev (03): 16 Dec 2005 SMT10E Series DC-DC CONVERTERS E Class Non-isolated TOP VIEW 0.039 (1.00) 12 Vin single output 3 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.039 (1.00) 0.530 0.010 (13.46 0.25) BOTTOM VIEW 1.3000.010 (33.02 0.25) 0.310 (7.87) 0.190 (4.83) 0.190 (4.83) 0.190 (4.83) 5 4 3 2 0.297 (7.54) 0.405 (10.29) 1 0.430 (10.92) 6 SIDE VIEW 0.323 (8.21) Installed Ht. 0.007 (0.18) Min Clearance Seating Plane 0.048 (1.22) Max. component Connector (6PL) Width: 0.112 0.003 (2.84 0.08) Length: 0.062 0.002 (1.57 0.04) All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 FUNCTION Remote ON/OFF Remote Sense +* Trim* +Vout Ground +Vin *The sense function and the trim function are customer specified options. Please consult factory for details. Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: smt10e_12.pdf Rev (03): 16 Dec 2005 0.075 (1.91) |
Price & Availability of SMT10E-12W3V3J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |